| S6061 series of Rotary Air Damper Actuators |
|
 |
|
|
The S6061 Series is direct-mount line of electric actuators that operates on 24VAC or VDC poser and is available for use with floating, proportional, or resistive controllers. |
|
|
S6061-series output 4 ~ 24 Nm torques, and each of them has two models: Digital and Analogue |
|
|
Specifications |
|
|
|
|
|
Rotation angle |
: |
0 - 90° (in 5° increments) |
|
|
Operating voltage |
: |
24VAC/24VDC, 220VAC 50/60Hz
110VAC 50/60Hz |
|
|
Power rating |
: |
6.5W , 7.5W |
|
|
Control input |
: |
Digital : On/off; 3-floating points,
Analogue : modulating 0(2) ~ 10V/0(4) ~ 20mA proportional input |
|
|
Position output |
: |
0(2) - 10V max 2mA |
|
|
Driving shafts |
: |
Cylinder shaft size: 20 mm
Square shaft size: 16 x 16mm |
|
|
Dimension |
: |
100(L) x 180(H) x 67.3(W) mm |
|
|
Housing |
: |
ABS engineering plastic |
|
|
Ambient temperature |
: |
Operation: -20 - 50°
5 - 95% RH non condensing
Storage: -40 - 80° |
|
|
Protection |
: |
IP44 |
|
|
Noise grade |
: |
< 45 dB |
|
|
Shipping weight |
: |
1240g |
|
|
S6061-XXD (3-points) wiring and setting S6061-XXD actuator can be operated under 3-point (floating point) control or 24VAC/DC switching signal control. |
|
|
S6061-XXA (0 ~ 10V) wiring and setting. The actuator makes action according to the signals, 0 (2) - 10V or(4) - 20mA from the electronic controller. When selects 0 (2) - 10V control signals, input impedance 100KW, the output impedance of signal U is over 50W. When select 0 (4) - 20mA control signals, input the maximum impedance is 500W |
|
|
S6061-series actuators have two auxiliary switches that can be set for any angle between 0 and 90°(factory set for 10°and 80°). They are used to output switching signals when the actuator rotates to the set angle. Refer to manual to set the angle. |
|
|
Ordering code |
|
|
|
