|
|
| |
 |
| S6011- WTX series of Water Pipe Temperature Transmitter |
| |
 |
|
| |
The S6011-WTXtransmitter is used to measure the liquid temperature in pipes or the air temperature in heating, ventilating and air conditioning applications. |
|
| |
Specification |
|
| |
Operating voltage |
: |
24VDC |
|
| |
Output signal |
: |
0 - 10V or 4 - 20mA |
|
| |
Measuring range |
: |
WTA : 0 - 50°C
WTB : 0 - 100°C |
|
| |
Ambient temperature |
: |
Operation: WTA : -10 - 80°C
WTB:0 - 110°C
Storage: -40 - 70°C, RH 10 - 90% ,non condensing
|
|
| |
Housing |
: |
Polycarbonate |
|
| |
Mounting |
|
| |
The transmitters can be mounted in virtually any position. For mounting follow the instructions below:
Locate the transmitters, where they will be exposed to representative conditions.
Avoid non-representative air draughts, direct sunlight, etc
For strap-on models use a thermal conductive paste between well or pipe and sensor to improve reaction times.
The transmitters should not be exposed to direct radiation (lamps, radiators, etc) or to |
|
| |
Ordering code |
|
| |
|
|
| |
Accessory |
|
| |
S6011-WT, Casing pipe (required)
There are two types of casing pipe, 55mm and 115mm. |
|
| |
Ordering code |
|
| |
|
|
|
|
|
|
